Fence guide

How Far Apart Should Fence Posts Be? Spacing Chart

Wood posts 6–8 ft apart (8 ft max); chain link up to 10 ft; T-posts 8–12 ft.

A line of evenly spaced wooden posts across a dry hillside
Measure post spacing centre to centre, along a level string line.

Space wood fence posts 6 to 8 ft apart, measured centre to centre, and never more than 8 ft. Chain link line posts go up to 10 ft apart, steel T-posts for wire fencing 8 to 12 ft, and panel fences go one panel width apart: about 1.93 m centres for standard 6 ft (1.83 m) UK panels and about 2.35 m for Australian steel panels. A 100 ft wood fence takes 14 posts at 8 ft or 18 at 6 ft.

Fence post spacing chart by fence type

How far apart fence posts should be
Fence typeTypical spacingMaximum
Wood privacy or picket6–8 ft8 ft
Chain linkup to 10 ft (6–8 ft with privacy slats)10 ft
Wire, mesh or barbed wire on T-posts8–12 ft12 ft
UK timber panels (1.83 m)about 1.93 m centresone panel
Australian steel panels (2.35 m)about 2.35 mone panel

Where the figures come from: Home Depot's privacy fence guide says wood posts should be no more than 8 ft apart and recommends 6 ft for the most strength, and Angi gives 6 to 8 ft for most fences. Hoover Fence's chain link guide says line posts are spaced a maximum of 10 ft apart, or 8 or 6 ft if the fence will carry privacy slats. Tractor Supply and Red Brand give 8 to 12 ft for T-posts. Jacksons Fencing lists the standard UK panel at 6 ft (1.83 m) wide on 100 × 100 mm posts, and Lysaght makes its Neetascreen steel panels 2350 mm wide.

Why 8 ft is the limit for wood fences

Wood fence rails are commonly 8 ft long, and each rail has to land on a post at both ends. Space the posts wider and you need longer, heavier rails that sag between posts over time. Closer posts cost a little more but make a stiffer fence that stands up better to wind, which is why Home Depot recommends 6 ft where you want the most strength: in exposed, windy spots, or with heavy boards like a board-on-board privacy fence.

If you buy ready-made wood panels, the panel sets the spacing: posts go one panel width apart, centre to centre, plus whatever the post adds if the panel sits between posts rather than on their faces.

Posts for a straight fence, by spacing

A straight run always has one more post than it has sections. These counts are for one straight run with no gates, from our fence calculator:

Fence posts for one straight run, by length and post spacing
Fence length6 ft spacing8 ft spacing10 ft spacing
25 ft654
50 ft1086
75 ft14119
100 ft181411
150 ft262016
200 ft352621

Add one post for every corner (each corner starts a new straight run) and one for every gate.

How to space fence posts evenly

Most fence lengths don't divide neatly into 8 ft sections. Rather than ending with one short section, divide the run into equal sections no wider than your maximum:

  1. Divide the length by the maximum spacing and round up. That's the number of sections.
  2. Divide the length by the number of sections. That's your actual post spacing.
  3. Add one to the number of sections. That's the number of posts.
Even post spacing for a straight run, at no more than 8 ft apart
Fence lengthSectionsPostsSpace posts at
30 ft457 ft 6 in
45 ft677 ft 6 in
50 ft787 ft 2 in
75 ft10117 ft 6 in
100 ft13147 ft 8 in
130 ft17187 ft 8 in

Equal sections look neater and every rail is cut the same. With pre-made panels you can't do this, so plan for one cut-down panel, at an end or by a gate where it's least noticed.

Chain link post spacing

Chain link has terminal posts at the ends, corners and gates, and lighter line posts between them. Hoover Fence's guide puts line posts no more than 10 ft apart, closer if you add privacy slats, because slats catch the wind. The same guide digs holes about 6 in across and 30 in deep, or below the frost line.

Chain link posts (terminal and line) for a straight run
Line post spacing100 ft200 ft
10 ft1121
8 ft1426
6 ft1835

T-post spacing for wire fencing

For wire, mesh and barbed wire, Tractor Supply recommends T-posts 8 to 12 ft apart, with 10 to 12 ft enough for a five- or six-strand barbed wire fence. The ends, corners and gates take wooden posts set in concrete and braced, because that's where the wire pulls hardest. For 100 ft between two wooden end posts you need 12 T-posts at 8 ft, 9 at 10 ft or 8 at 12 ft.

Panel fences in the UK and Australia

Panel fences are spaced by the panel. In the UK the standard panel is 6 ft (1.83 m) wide and slots between 100 mm posts, so posts end up about 1.93 m apart, centre to centre. In Australia, Lysaght's Neetascreen steel panels are 2350 mm wide, so posts go roughly that far apart; follow the maker's installation guide for the exact centres.

Posts and panels for one straight run of panel fencing
Run lengthUK posts (1.83 m panels)UK panelsAustralian posts (2.35 m panels)
5 m434
10 m766
15 m988
20 m121110
30 m171614

Worked example: a 150 ft privacy fence with two corners and a gate

  1. The fence has three straight runs (two corners) and one 4 ft gate, so 146 ft of it is fence.
  2. Spread over three runs, each run is about 48.7 ft: at no more than 8 ft apart that's 7 sections per run, 21 in all.
  3. Posts: 21 sections + 3 runs + 1 for the gate = 25 posts.
  4. Concrete: in 10 in holes, 30 in deep with 6 in of gravel, that's 43 bags of 80 lb mix.

The fence calculator does this for you, with panels or pickets, gates and concrete. For runs of very different lengths, work each run out on its own.

Gates and corners

  • Gate posts: the gate's width, plus the gap the hinges and latch need, sets the space between the two gate posts, so check the gate or hardware instructions before you dig. Gates pull on their posts every time they swing, so use a heavier post set deeper; Angi says a 10 ft gate needs 6 × 6 posts.
  • Corners and ends: each corner starts a new run, so measure the spacing from the corner post on each side. On wire fences, corner and end posts are braced wooden posts, never T-posts.

Fence post spacing on a slope

Measure post spacing level, along a string pulled tight between the end posts, not along the ground. On a slope the ground distance is longer than the level distance, so measuring along the ground spaces the posts too far apart for the rails. Stepped fences keep each section level; racked fences follow the slope, but both are laid out from the level measurement.

How to lay out fence posts

  1. Set the end and corner posts first and run a string line between them at the height of the posts' faces.
  2. Measure along the string from the centre of the first post and mark each post centre with a stake or spray paint.
  3. Check the last section before you dig. If it's short, re-space the run evenly with the steps above.
  4. Dig, set the posts against the string and brace them plumb while the concrete sets.

Quick answers

  • What is the maximum distance between wood fence posts? 8 ft, centre to centre.
  • How far apart are 4 × 4 fence posts? 6 to 8 ft for most wood fences; 6 ft where it's windy or the boards are heavy.
  • How far apart are chain link posts? No more than 10 ft; 6 to 8 ft with privacy slats.
  • How far apart are T-posts? 8 to 12 ft: 9 per 100 ft at 10 ft spacing between two end posts.
  • How many posts for a 100 ft fence? 14 at 8 ft, 18 at 6 ft, in a straight line with no gate.

Common mistakes

  • Measuring edge to edge. Spacing is measured from the centre of one post to the centre of the next, or the rails and panels won't line up.
  • Forgetting the extra post. Ten sections need eleven posts, and every corner and gate adds one more.
  • Spacing to the ground on a slope. Measure level along a string, not along the ground.
  • Widening the gaps to save posts. Two or three fewer posts save little and leave rails that sag.

For post sizes and depths, see fence post size and spacing; for concrete per post, see how much concrete per fence post.

Sources

  1. Home Depot: How to build a 6 ft redwood privacy fence (step-by-step PDF)
  2. Angi: Fence post sizes
  3. Hoover Fence: Chain link fence installation guide (PDF)
  4. Tractor Supply: How to install T-post fencing
  5. Red Brand blog: fence post spacing
  6. Jacksons Fencing: Fence panel heights and widths
  7. Lysaght: Neetascreen fencing (panel widths)